Campbell Scientific LoggerNet Datalogger Support Software - Manual (Page 49)

Section 3. Introduction
Currently, there are three command line arguments:
/WorkDir Sets the working directory to something other than the default.
Usage:
“C:\Program Files\CampbellSci\LoggerNet\ToolBar.exe”
/WorkDir=C:\CampbellSci\test
where “C:\Program Files\CampbellSci\LoggerNet\ToolBar.exe”
is the directory and filename for the LoggerNet Toolbar (which
essentially is the LoggerNet server) and C:\CampbellSci\test is the
working directory to be used.
/M Launches LoggerNet in a minimized state. Usage:
“C:\Program Files\CampbellSci\LoggerNet\ToolBar.exe” /m
/IPPORT=XXXXX Causes the server to use port XXXXX for TCP/IP
communications with clients. Handy if some other software is
using the default port of 6789. Usage:
“C:\Program Files\CampbellSci\LoggerNet\ToolBar.exe” /ipport=12345
If you are running LoggerNet Admin, which requires that you log
in to a particular sever with each client, you must specify this
alternate port number when entering the server address in the login
window (e.g., LocalHost:6700 or 192.168.7.123:6700).
If LoggerNet is being run as a service (available in LoggerNet
Admin), you use LoggerNet Service Manager to specify an
alternate working directory or IP port.
3.2.1.5 Alternate Language Support
Certain LoggerNet clients can display the user interface component text (for
buttons, dialog boxes, etc.) in a language other than English if a separate
LoggerNet language package has been installed. If a language package is
installed on your machine, you will see the language in the list at Tools |
Options | Languages. When a new language is chosen, the Toolbar will
immediately reflect the change. Opened clients will not reflect the change until
they are closed and reopened.
Applications that support alternate languages are Setup, Connect, Status
Monitor, Task Master, Short Cut, CRBasic Editor, View Pro, CardConvert,
TroubleShooter, Network Planner, PakBus Graph, LogTool, the Device
Configuration Utility, Data Export, and the RWIS Administrator.
Available alternate language packages are provided by Campbell
Scientific’s international representatives or on the CSI website.
They are not included in a standard LoggerNet installation.
NOTE
NOTE
NOTE
3-5