Campbell Scientific LoggerNet Datalogger Support Software - Manual (Page 538)

Appendix E. Log Files
TABLE E-1. Transaction Log Messages
Code Message Text Message Parameters Message Meaning
User Response to
Message
24 Hole collect
response
received
The datalogger has
returned the response
to the hole collect
request. This will
contain either the
data or state that the
hole is lost.
25 Hole collect
failed
The hole collection
request either timed
out or a
communication
failure occurred.
Check communications
with the datalogger by
trying to check the
clock. If that fails
follow the steps for
message 14.
26 Data polling
started
Data collection by
polling started.
27 Data polling
complete
Data collection by
polling completed
28 Data polling
failed
Data collection by
polling failed due to
communication
failure or a timeout.
Check communications
with the datalogger by
trying to check the
clock. If that fails,
follow the steps for
message 14.
29 Directed data
query start
A user initiated query
has been started.
30 Directed data
query continue
The requested data in
the directed query
could not fit in one
block and the next
part is being
requested.
31 Directed data
query complete
The user requested
data has been
received by the
server.
32 Directed data
query failed
The directed query
request failed.
33 Getting logger
table definitions
The server is getting
the table definitions
from the datalogger.
Getting the datalogger
table definitions will
erase any data in the
data cache.
34 Received logger
table definitions
The server has
received the
datalogger table
definitions.
35 Failed to get
logger table
definitions
The request to get
table definitions has
failed.
E-6