Sony SVD1322BPXR - Manual (Page 88)

To change the sound rate and bit depth
The sound rate and bit depth of the digital audio output signal should be set according to your
digital audio device.
Follow the above steps 1 to 3, and then select the HDMI device icon and Properties. On the
Advanced tab, select the sample rate and bit depth (for example, 16 bit, 48000 Hz (DVD
quality)) which the device supports, and then OK.
Notes on the LCD screen
Read the following precautions for correct use of the LCD screen.
The LCD screen is manufactured using high-precision technology. You may, however, see
tiny black points and/or bright points (red, blue, or green) that continuously appear on the
LCD screen. This is a normal result of the manufacturing process and does not indicate a
malfunction.
Do not scratch the surface of the LCD screen or exert pressure on it. This could cause
damage.
Do not exert pressure on the LCD screen with the screen folded as it may scratch the LCD
screen or soil it.
The LCD screen may become warm during operation. This is normal and does not indicate a
malfunction.
Due to the mechanical design of your VAIO computer’s LCD screen/touch screen, the screen
surface may become warm while you are using the computer for an extended period of time.
This is normal and does not indicate a malfunction. (Touch screen equipped models)
The LCD screen/touch screen is made of reinforced glass to implement high durability,
however, treat the screen with care as it is not 100% unbreakable. In case the screen breaks
into small pieces, be careful not to cut yourself on the pieces of broken glass. (Touch screen
equipped models)
Do not leave the LCD screen facing the sun. This could damage the LCD screen. Be sure to
block direct sunlight when using your VAIO computer near a window.
Do not exert pressure on the LCD screen or its edges. The LCD screen may be sensitive to
pressure or added stress, and exerting pressure may damage the screen or cause it to
malfunction.
Using your VAIO computer in low temperature conditions may produce a residual image on
the LCD screen. This does not indicate a malfunction. When the computer returns to normal
temperature, the screen returns to normal.
A residual image may appear on the LCD screen if the same image is displayed for an
extended period of time. The residual image disappears after a while. You can use a screen
saver to prevent residual images.
Using the Multiple Monitors Function
The Multiple Monitors function allows you to distribute portions of your desktop across separate