Sony SVD1322BPXR User Manual
Page 95
5. Plug one end of an HDMI cable to the HDMI input port on the home theater receiver or
surround sound decoder device and the other end to the HDMI output port on your VAIO
computer.
Hint
You can adjust the screen resolution of the connected TV with your VAIO computer. See
Changing the Resolution (Size) of the Screen Image on an HDMI-Connected Device
for more
information.
With the HDMI connection, the volume can be adjusted by the connected audio device only.
Your VAIO computer has no control over the output volume of any connected devices.
Stopping Wireless WAN Communications (Wireless WAN equipped models)
You can stop wireless WAN (WWAN) communications by following these steps.
1. Open the charms and select the
Settings charm. (See
to open the
charms.)
2. Select
(the network icon).
3. Change the Mobile Broadband setting to Off.
Note
Turning off the wireless WAN function while accessing remote documents, files, or resources
may result in data loss.
Starting Wireless WAN Communications (Wireless WAN equipped models)
You can establish wireless WAN (WWAN) communications using Mobile Broadband.
1. Open the charms and select the
Settings charm. (See
to open the
charms.)
2. Select
(the network icon).
3. Make sure Airplane mode is Off and change the Mobile Broadband setting to On.
4. Select a carrier name or service name and Connect.
After the connection is established, Connected appears.
To disconnect from the Internet
Open the charms and select the
Settings charm. Select
(the network icon), a carrier
name or service name, and Disconnect.