Festo Контроллер двигателя SFC-ST - Manual (Page 10)

Contents and general instructions
VIII
Festo P.BE−SFC−DC−PB−S7−E N en 0604NH
Basic principles of programmed software
Please note that it is not possible with the present state of
technology to create programmed software which functions
without problems and is compatible with all applications and
combinations intended by the user.
As a rule the software must therefore be used in the desigĆ
nated manner as specified in the program description and in
the user instructions.
At the moment when the software is transferred or made
available, it is in a state in which it will function under normal
operating and application conditions.
Festo does not guarantee that the software will suffice for all
applications and purposes intended by the user, or that it will
function without problems when used with other programs,
or that it is compatible with these programs. The responsibilĆ
ity for the correct selection and the consequences of using
the software within the scope of use defined by the user, as
well as for the intended and achieved results therefore lies
with the user. The same applies to the written material supĆ
plied with the software.
The use of the programmed software does not exempt you as
customer from your duties and responsibility for observing
and adhering to technical machine and safety regulations as
well as for a comprehensive functional check.