Festo Контроллер двигателя SFC-ST - Manual (Page 64)

4. Parametrizing blocks
4−10
Festo P.BE−SFC−DC−PB−S7−E N en 0604NH
4.4 Block PRM_DB−FILE
In order to automate the transfer of several parameters, block
PRM_DB−FILE offers the possibility of transferring parameter
sets from a global DB to the controller or of receiving paraĆ
meter sets. The block uses one of the three transfer blocks
FB20, FB21 or FB22 for the transfer.
List of the parameters for reading / writing
Individual parameter
Saving the parameters read
DB Source
DB Target
While i < n
PROFIBUS
Block
PRM_FPC,
PRM_DPV1_SFC,
PRM_DPV1_SFB
Block
PRM_DB−FILE
Fig. 4/4: System overview upload/download