Festo Контроллер двигателя SFC-ST - Manual (Page 122)

B. Supplementary information
B−8
Festo P.BE−SFC−DC−PB−S7−E N en 0604NH
Name FHPP Name
Access 2) Type Subind. 1) PNU
Axis data electric drives 1 ć electronic type plate
Motor Type 1030 ć uint16 rw2
Maximum Current 1034 ć uint16 rw2
Motor Rated Current 1035 ć uint32 rw2
Axis data electric drives 1 ć standstill monitoring
Position Target Value (nominal position) 1040 ć int32 ro
Position Actual Value (current position) 1041 ć int32 ro
Contouring Error Window (standstill position window) 1042 ć uint32 rw2
Contouring Error Timeout (standstill monitoring time) 1043 ć uint16 rw2
1) Subindices of the parameter for FHPP with access via parametrizing blocks (0...n−1)
2) ro = read only; wo = write only; rw/rw1 = read and write at any time;
rw2 = read and write during commissioning
Tab. B/1: Overview of FHPP parameters