Festo Контроллер двигателя SFC-ST - Manual (Page 38)

2. Installation and project overwiev
2−10
Festo P.BE−SFC−DC−PB−S7−E N en 0604NH
2.2 Dearchivating the example project
The example project will be made available as project
archive.
Procedure for dearchivating
1. Open the dialogue Retrieving ć Select an archive" with
the command [File] [Retrieve] (āā[File] [Dearchivate]āā).
Fig. 2/3: Dearchivate project
2. Select the archive file of the example project
(e.g. SFC−DC.zip").
3. Select the desired destination path in the dialogue
Select destination directory".
If the option Scan destination directory when dearchivatĆ
ing" is switched off in the basic settings of the SIMATIC
Manager, the preset path will be used directly as the desĆ
tination path during dearchivation.
4. The unpacking of the project will be shown in a DOS or
console window. The project will then be opened in the
SIMATIC Manager: