Festo Контроллер двигателя SFC-ST - Manual (Page 71)

4. Parametrizing blocks
4−17
Festo P.BE−SFC−DC−PB−S7−E N en 0604NH
Fault numbers Description
13 0x0C Text not legible in cyclic exchange
(14) 0x0D ć (reserved ć name not legible in cyclic exchange) 1)
(15) 0x0E ć (reserved ć text array does not exist) 1)
(16) 0x10 ć (reserved ć PPO−Write missing) 1)
(17) 0x11 ć (reserved ć order cannot be processed because of operating status) 1)
(18) 0x12 ć (reserved ć other faults) 1)
(19) 0x13 ć (reserved ć date not legible in cyclic exchange) 1)
(20) 0x14 ć (reserved ć non−permitted value) 1)
(21) 0x15 ć (reserved ć reply too long) 1)
22 0x16 Non−permitted: Attributes, number of elements, PNU or IND
(23) 0x17 ć (reserved ć Write request: non−permitted format) 1)
24 0x18 Write request: Number of values not permitted
(...99) 0x64 ć (reserved ć PROFIBUS)
100 0x65 ć (reserved ć Festo: ReqID is not supported) 1)
(...255) 0xFF ć (reserved ć Festo)
1) These fault numbers are not used
Tab. 4/10: Fault information