Starting a positioning task in record select mode – Festo Контроллер двигателя SFC-ST User Manual
Page 79
Advertising
5. Examples
5−7
Festo P.BE−SFC−DC−PB−S7−E N en 0604NH
5.1.4
Starting a positioning task in Record Select mode
When the Record Select mode has been set with the bit
Operation_Mode, the positioning record saved in the SFC−DC
must be set with the value Record_No.
Fig. 5/4:
Preselecting the record number
The positioning task is started with the bit Start_Task.
Advertising