RADWAG WLC 0,6/A1/C/2 Precision Balance - Manual (Page 12)

- 12 -
 scales WLC/B1:
 scales WLC/C/K:
 scales WLC/C/R:
6. GETTING STARTED
 After unpacking and mounting the scale level it
out. Use levelling legs and the level condition
indicator installed in the basis of the scale.
 Turn the device on using the key – keep pressing the key
for about 0.5 sec,
 Wait for the test completion,
 Then you will see zero indication and pictograms:
- zero indication
- stable result
kg - weight unit
 If the indication is not zero press key.