Selecting a tare value from the memory – RADWAG WLC 0,6/A1/C/2 Precision Balance User Manual
Page 53
Advertising
- 53 -
The program returns to the following window:
Return to weighing:
Press
.
16.10.2. Selecting a tare value from the memory
Enter
<tArE> function according to the ch. 16.10.1 of the manual,
The program goes to displaying the first value from the selection
of tare values
<tArE 0> (press
to chose different values):
To use an entered tare value press
, you will see the tare value
on the display preceded by the „-„ sign and the
Net pictogram:
Caution:
A tare value from the memory is not remembered after powering off
and on the scale.
Advertising
This manual is related to the following products: