RADWAG WLC 0,6/A1/C/2 Precision Balance - Manual (Page 47)

- 47 -
16.8.1. Enabling the work mode
Procedure:
 Enter to <Add> function:
 A letter „ P” in the left side of the display is a confirmation that
<Add> function have been selected:
16.8.2. Totalizing procedure
 Enter <Add> function according to ch. 16.8.1,
 Put the first load on the pan. If the weighing procedure is performed
in a container put the container on the pan first and tare it. Then put
the first load on the pan and confirm it by pressing when stable
(signalled by ),
 You will see a sum of weighings on the display, the „▲” pictogram
in the upper right corner will be displayed and the weighing result
will be printed on the printer connected to the indicator.