RADWAG WLC 0,6/A1/C/2 Precision Balance - Manual (Page 51)

- 51 -
 Load an animal to the platform,
 After exceeding the -LO- value (see 14.2), program starts the
weighings process. The appearance of subsequent hyphens
< - - - - - - - > showing the progress,
 After completing the process of weighings the result is latched
on the display and additionally the OK pictogram is shown in
the upper part of the display:
 You can start the procedure of weighing animals again by
pressing ,
 After removing the animal from the platform program returns
to the window:
Return to weighing:
 Press
.
16.10. Tare memory
Users are allowed to Enter Up to 9 tare values to the memory.
16.10.1. Entering the tare value to the scale memory
Procedure:
 Enter to <tArE> function: