A report from calibration – RADWAG WLC 0,6/A1/C/2 Precision Balance User Manual
Page 59
Advertising
- 59 -
17.1.3. A report from calibration
Users, in parameter
<P6.4.CA-r>, can enable a function of automatic
printout of report form calibration process on a connected printer.
Procedure:
Enter the submenu
<P6.CAL> and then:
Powrót do ważenia:
Patrz – punkt 11.2.2. – powrót do ważenia.
The example printout of report from calibration:
Advertising
This manual is related to the following products: