RADWAG WLC 0,6/A1/C/2 Precision Balance - Manual (Page 17)

- 17 -
11.2. Browsing user menu
Use scale’s keys to move inside the menu.
11.2.1. Keypad
+
Entering main menu
+
Inscribing tare value
Increasing a digit value by „1”
moving down in the menu
+
Battery / accumulator state monitoring
+
Toggling between gross / net values
Selecting the parameter or changing the value
of a selected parameter
Entering the selected submenu
or activating a parameter for changes
Confirmation (enter)
Leaving without changes or reaching a higher level
of the menu
11.2.2. Return to the weighing mode
The changes that have been introduced should be saved
in order to keep them in the memory for good.
While leaving parameters press key until the text
<SAuE?> appears on the display. Then press:
– to save changes or – to leave without changes.