RADWAG WLC 0,6/A1/C/2 Precision Balance - Manual (Page 8)

- 8 -
 Close the lid of the chamber for batteries:
In WLC A2, WLC C/2 and WLC B1 scales the worn out
accumulator can be exchanged to a new one by the
authorized service of the manufacturer.
2.3. Operation in a strong electrostatic field
If the device is about to operate in a strong electrostatic field
(e.g. printing houses etc.) it should be connected to the earthing.
Connect it to the clamp terminal signed .
3. WARRANTY CONDITIONS
A. RADWAG is obliged to repair or change those elements that
appears to be faulty because of production and construction reason,
B. Defining defects of unclear origin and outlining methods of
elimination can be settled only in participation of a user and the
manufacturer representatives,
C. RADWAG does not take any responsibility connected with
destructions or losses derives from non-authorized or inappropriate
(not adequate to manuals) production or service procedures,
D. Warranty does not cover:
 Mechanical failures caused by inappropriate maintenance of
the device or failures of thermal or chemical origin or caused
by atmospheric discharge, over voltage in mains or other
random event,
 Inappropriate cleaning.