RADWAG WLC 0,6/A1/C/2 Precision Balance - Manual (Page 46)

- 46 -
16.7. Measurement of maximal force on the pan – latch
Procedure:
 Enter to <toP> function:
 Confirmation of choice of <toP> function is indication of the Max
pictogram:
 Apply a force to the weighing pan,
 The display of scale will latch the maximum value of the force,
 Remove loads from the pan,
 Before the next measurement press the key.
Return to weighing:
 Press the key twice.
16.8. Totalizing
Scale software is equipped in a totalizing function of single weighings.
The totalizing procedure can be documented on the printer connected
to the indicator.