RADWAG WLC 0,6/A1/C/2 Precision Balance - Manual (Page 35)

- 35 -
Procedure:
After displaying the level of batteries (in per cents) the program returns
to weighing.
15.4.2. Battery discharge pictogram
The symbol (bat low) switches on when the voltage level drops to 18%
of the accepted level of voltage. It means that charging or exchanging
batteries is required.
Low level of batteries:
 pictogram on the display,
 After some time the device will automatically switch off
to protect the batteries from destructible discharging,
 Charging is signalled by (blinking period about 2 seconds)
on the display.
15.4.3. Accumulator charging option
This function allows to switch on charging algorithm for NiMH batteries
(for scales of WLC C1…C2, WLC/B1 series) or a gel cell SLA
accumulator (for scales of WLC/A2, WLC…/C/2 series):
a) Parameter <CHr6> set to <no>:
 Pictogram does not appear, charging disabled,
 During software initializing, after turning on <bAtt>.
b) Parameter <CHr6> set to <YES>:
 Pictogram blinks slowly (period about 2 seconds),
charging is enabled,