Counting pieces of the same mass – RADWAG WLC 0,6/A1/C/2 Precision Balance User Manual
Page 39
Advertising
- 39 -
16.3. Counting pieces of the same mass
Standard solution is equipped with option of counting small pieces of the
same mass. It is possible to execute a tare function in this operating mode
in order to tare a container value.
Notice:
1. Counting pieces does not work together with other scale functions,
2. The counting pieces function is not saved as a default start function
so it is not remembered after restarting.
Procedure:
Enter to
<PcS> function:
You will see a blinking value of sample quantity.
Press
key to start setting quantity of sample, you have a few
options to chose from:
Advertising
This manual is related to the following products:
- WLC 6/A2/C/2 Precision Balance WLC 1/A2/C/2 Precision Balance WLC 120/C2/K Precision Balance WLC 120/C2/R Precision Balance WLC 60/C2/K Precision Balance WLC 60/C2/R Precision Balance WLC 30/F1/R Precision Balance WLC 20/A2 Precision Balance WLC 12/F1/R Precision Balance WLC 10/A2 Precision Balance WLC 6/F1/K Precision Balance WLC 6/F1/R Precision Balance WLC 6/A2 Precision Balance WLC 2/A2 Precision Balance WLC 1/A2 Precision Balance WLC 0,6/A1 Precision Balance WLC 0,6/B1 Precision Balance