RADWAG WLC 0,6/A1/C/2 Precision Balance - Manual (Page 18)

- 18 -
12. WEIGHING
Put a load you want to weigh on the weighing pan. When the
pictogram appears it means that the result is stable and ready to read.
In order to assure long-term operation and appropriate measurements of
weighted loads following precautions should be taken into consideration:
 Loads should be placed on the pan delicately and carefully
in order to avoid mechanical shocks:
 Loads should be placed centrally on the pan (errors caused
by eccentric weighing are outlined by standard PN-EN 45501
ch. 3.5 and 3.6.2):
 Do not load the pan with concentrated force:
 Avoid side loads, particularly side shocks should be avoided