RADWAG WLC 0,6/A1/C/2 Precision Balance - Manual (Page 21)

- 21 -
12.5. Selection of basic weight unit
This function is used to set weight unit the scale will start with.
Procedure:
 Enter the submenu <P3.Unit> and then:
 press , until the expected unit appears on the display:
Options:
A. When the basic unit is [kg], users can toggle between:
[kg, lb, N], for verified scales [lb] is not accessible,
B. If the basic unit is [g], users can toggle between:
[g, ct, lb], for verified scales [lb] is not accessible,