RADWAG WLC 0,6/A1/C/2 Precision Balance - Manual (Page 31)

- 31 -
15. OTHER PARAMETERS
The user can set parameters which influence the scale operation.
They are gathered in the submenu <P5.othr> e.g. backlight and beep
signal. Enter this submenu <P5.othr> according to chapter 11.2.
15.1. Backlight function
Program recognises the way the scale is supplied (mains, battery)
and automatically selects the way of operating on the backlight:
bl – for mains,
blbt – for batteries or rechargeable battery pack.
15.1.1. Backlight for supplying from mains
Procedure:
 Enter the submenu <P5.othr> and then:
bL no - backlight switched off
bL YES - backlight switched on
bL Auto - backlight switched off automatically if indication
becomes stable for about 10s