RADWAG WLC 0,6/A1/C/2 Precision Balance - Manual (Page 37)

- 37 -
Procedure:
1. Supply the indicator from mains,
2. Charge batteries for 12 hours (time of charging 2200mAh batteries),
3. After 12 hours unplug from mains,
4. Use the device up to the moment of self powering down,
5. Repeat the process of charging starting from point 1.
Notice:
They reach their optima capacity after three cycles of full charging
and discharging.
16. OPERATION MODES
16.1. Setting accessibility of operation modes
In this parameter group users can disable/enable accessibility
of functions after pressing key.
Procedure:
 Enter the submenu <P4.Func> and then:
no – mode is disabled
YES – mode is enabled