Konica Minolta Printgroove - Manual (Page 104)

Printgroove POD Queue Tools 5
Printgroove POD Queue 5-33
Binding Channel Binding None of these Binding Options are supported
inline by Konica Minolta devices. If a value ap-
pears here, the Binding option must be com-
pleted offline.
The setting is noted on the Banner Page of the
job.
Side Sewn
Strip Bind
Tape
Thread Sealing
Wire Comb
Coil Binding
Hard Cover
Plastic Comb
Ring
Sewn
Bottom Bottom is not a supported Binding Location op-
tion for jobs printed by Konica Minolta devices.
If the value appears here, the Bottom Binding
option must be completed offline.
The setting is noted on the Banner Page of the
job.
(specific color) If a color appears here, it indicates a color has
been assigned to the selected Binding Option.
Printgroove POD Queue does not recognize
these Color values. The colored Binding Option
must be applied offline.
The setting is noted on the Banner Page of the
job.
Front Cover Size These Front Cover Paper values are not recog-
nized by Printgroove POD Queue and must be
applied manually. Resolve as follows:
• Load the correct paper into a tray, then select
the same tray via the Job Ticket Editor (Cover
Sheet Settings --> Front Cover --> Paper
Source). Drag-&-drop the job to the device to
which the selected tray belongs and the job
should process normally, printing the Front
Cover on the correct paper.
The setting is noted on the Banner Page of the
job.
Weight
Color
Grade
Coating
Non-Supported Settings Processing Options
Setting Sub-Setting Processing Options