Konica Minolta Printgroove - Manual (Page 99)

Printgroove POD Queue Tools 5
Printgroove POD Queue 5-28
Image Quality Settings
Image Quality Settings has no sub-menus. There are five settings.
Print Density A slider provides settings from -5 (lightest) to 1 (darkest). You may
move the slider to any of the seven supported positions.
Toner Save If the checkbox is selected, the option is active. The Toner Save
setting for the print job appears in the drop-down menu. The
menu contains all available setting options (Type 1 (Toner Save) /
Type 2 (Draft Print)). You may change the drop-down option or
deselect the checkbox. By default, this value is Off.
Smoothing If the checkbox is selected, the option is active. The Smoothing
setting for the print job appears in the drop-down menu. The
menu contains all available setting options (Type 1 / Type 2 / Type
3). You may change the drop-down option or deselect the check-
box. By default, this value is Off.
Resolution: The default Resolution setting for all jobs is 600 dpi. You may
change the drop-down option.
Fine Line Precision: If the checkbox is selected, the option is active. The Fine Line Pre-
cision setting for the print job appears in the drop-down menu.
The menu contains all available setting options (Level 1 / Level 2 /
Level 3 / Level 4).
You may change the drop-down option or deselect the checkbox.
By default, this value is Off.