Konica Minolta Printgroove - Manual (Page 122)

Printgroove POD Queue Tools 5
Printgroove POD Queue 5-51
2. Perfect Binding
There are three values in the [Perfect Binding] drop-down menu: [No Value
Set], [On], [Off]. If [On] is selected, all print jobs that have [Perfect Binding]
specified are considered for this Group when [Auto Mode] is selected. If Off
is selected, all print jobs that do not have [Perfect Binding] specified are con-
sidered for this Group when [Auto Mode] is selected.
Inter-Sheet Settings
Inter-Sheet Settings has no sub-menus. There are two settings:
1. Chapter
There are three values in the [Chapter] drop-down menu: [No Value Set],
[On], [Off]. If [On] is selected, all print jobs that have any [Chapter] settings
specified are considered for this Group when [Auto Mode] is selected. If [Off]
is selected, all print jobs that lack [Chapter] settings are considered for this
Group when [Auto Mode] is selected.
2. Per Page Settings
There are three values in the [Per Page Settings] drop-down menu: [No Value
Set], [On], [Off]. If [On] is selected, all print jobs that have any [Per Page Set-
tings] specified are considered for this Group when [Auto Mode] is selected.
If [Off] is selected, all print jobs that lack [Per Page Settings] are considered
for this Group when [Auto Mode] is selected.
Customer Information
The Customer Information Setting Option has no sub-menus. You may en-
ter data into all of the text fields. Please see “Text Use Conventions” on
page 4-4 for details about text field limitations. Any job that matches speci-
fied fields are considered for the Group when [Auto Mode] is selected.
Punch There are three values in the [Punch] drop-down menu: [No
Value Set], [On], [Off]. If [On] is selected, all print jobs that have
[Punch] settings specified are considered for this Group when
[Auto Mode] is selected. If [Off] is selected, all print jobs that
do not have [Punch] settings specified are considered for this
Group when [Auto Mode] is selected.
Folding There are three values in the [Folding] drop-down menu: [No
Value Set,] [On], [Off]. If [On] is selected, all print jobs that have
[Folding] settings specified are considered for this Group
when [Auto Mode] is selected. If [Off] is selected, all print jobs
that do not have [Folding] settings specified are considered
for this Group when [Auto Mode] is selected.