Konica Minolta Printgroove - Manual (Page 45)

Configuring Printgroove POD Queue 3
Printgroove POD Queue 3-24
3.7 Printer Management
The Printers section of the Destination panel lists all the printers available for
use with Printgroove POD Queue. If you are automatically discovering print-
ers via SNMP, this list is populated automatically and may include KONICA
MINOLTA printers or any supported third-party printer. If you are manually
adding printers, this list is populated as you add those printers. You may use
SNMP Discovery and manually add printers (please see “SNMP Settings” on
page 3-8 for details).
While an unlimited number of printers can appear in the Destination panel,
Printgroove POD Queue limits the number of printers that can be actively
monitored and to which print jobs may be sent. By default, this number is
five. Should you wish to add additional devices, please see your Konica Mi-
nolta Sales Representative.
From the selection of printers that appear in the Destination panel, you must
select and actively
Enable the five (or more, if licensed) printers you wish to
monitor and use to print jobs. You need to do this before Printgroove POD
Queue can be used.
You may change these settings regularly. If an Enabled printer experiences
a fatal error and is off-line, or if an Enabled printer must stop for a PM, those
printers can be Disabled and other printers Enabled so that Printgroove
POD Queue operates with the maximum allowed printers.
All but Guest -level users may Enable or Disable printers.
Procedures for Manually Adding and Uninstalling printers and Enabling or
Disabling printers follow.