Konica Minolta Printgroove User Manual
Page 192
Using Printgroove POD Queue
6
Printgroove POD Queue
6-26
2
Manually remove the remaining color pages from the PI Tray of the
black and white printer.
3
Remove and discard the remaining pages of the set upon which the er-
ror occurred.
4
Locate the cancelled job in the Completed Jobs panel. Right-click and
select Recover Color Cluster Job from the drop-down menu. This op-
tion is only available is the Status of the job is User Cancel and if the
original job was a Color Cluster job. Printgroove POD Queue has stored
information about the job, specifically the number of sets completed
prior to the error and the number remaining. Printgroove POD Queue
also assumes that one color job must be reprinted in order to correct
the error. There are four situations that will stop the Recovery process
from proceeding. If any of the following conditions occur, a popup will
open and inform you that Recovery is not possible:
–
The selected job is not a Color Cluster job
–
The original Cluster used to process the job has one or more disa-
bled printers
–
The original Cluster used to process the job no longer exists (was
deleted)
–
This is the second (or later) attempt to recover this job (only 1 is al-
lowed)
–
NOTE: If more than one color job is effected by the printing error,
you should move the job to the Inbox panel, change the copy count
and print the remaining copies of the job.
5
Job Ticket_05 and _06 are sent to the Cluster-designated color printer
and appear in the Printer Jobs panel in the folder of that printer. 1 copy
of the job is printed.
6
When Job Ticket_06 reaches the top of the queue, it processes. The
finishing settings specified in the Job Ticket are not applied at the color
printer.
7
After Job Ticket_06 prints, remove the color pages from the printer,
combine them with the other color sets (removed in Step 2) and set
them aside until required.
8
Job Tickets_07 and _08 are sent to the Cluster-designated black &
white printer and appear in the Printer Jobs panel in the folder of that
printer.
9
When Job Ticket_08 reaches the top of the queue, the printer shifts to
Wait Mode. This means that the printer will not print the job until you
release it.