Konica Minolta Printgroove - Manual (Page 140)

Printgroove POD Queue Tools 5
Printgroove POD Queue 5-69
Edit a Virtual Queue
1
Right-click on the Virtual Queue’s icon in the Destination panel and
select [Edit] from the drop-down menu.
– Note: If another user is viewing the selected Virtual Queue a pop-
up message informs you that the Virtual Queue is locked.
2
The Virtual Queue's name cannot be changed. You must create a new
Virtual Queue.
3
Modify additional settings for the [Virtual Queue] as required.
4
If the [Cancel] button is selected, the modified settings are not saved.
If the [Save] button is selected, the changes are applied to the [Virtual
Queue] and a constraint check is conducted. If any constraints are en-
countered, a Constraints screen opens. Click the [OK] button to close
the message and modify the Virtual Queue settings to correct the con-
straints. Click the [Save] button.
5
When all the constraints are eliminated, the Virtual Queue Editor closes.
Delete a Saved Virtual Queue
1
Right-click on the Virtual Queue’s icon in the Destination panel and
select [Delete].
2
A pop-up message verifies this request. If the [OK] button is selected,
the Virtual Queue is deleted and removed from the Destination panel.
Any jobs assigned to the Virtual Queue that are currently processing
will be cancelled and moved to the Completed Jobs panel. If the [Can-
cel] button is selected, the Virtual Queue is not deleted.