Konica Minolta Printgroove - Manual (Page 115)

Printgroove POD Queue Tools 5
Printgroove POD Queue 5-44
5 Printer Constraint Check: Printgroove POD Queue also conducts a constraint
check to see if the printer supports all the job ticket
settings. If a printer cannot complete all job ticket set-
tings, the printer’s header turns red. If the printer is
also assigned to a Cluster, the Cluster’s header row
also turns red.
NOTE: If a print job has Chapter, Booklet, Adhesive
Binding, Staple, Sheet Insertion, Cover Settings or
Per Page Settings selected, it cannot be sent to a
Page cluster since it splits a single job between multi-
ple printers. In this situation, all Page clusters will be
eliminated as possible recommends.
6 PM Count: Printgroove POD Queue next checks the PM Count of
all remaining printer and printers assigned to Clusters
and compares that number to the copy count of the
print job. If the print job would exceed the remaining
PM count of a printer, the header row of the printer or
Cluster turns red.
7 Paper Size/Paper Type (default op-
tion): Printgroove POD Queue considers the remaining
printers and printers assigned to Clusters and checks
the [Paper Size] and [Type] currently loaded. Consum-
able levels are also checked (Toner, Staples, etc.). If
the correct paper is not currently loaded or if consum-
able levels are low enough to generate a printer Warn-
ing message, the header row of the printer or Cluster
turns yellow.
8a Expected Wait Time
(default option): If a printer or Cluster supports all the criteria noted in
1-7 above, the header row turns green indicating a
perfect match. Printers only NOT Clusters: If two or
more printers support all features noted in 1-7 above,
Printgroove POD Queue compares the [Time Remain-
ing] count of each of the printers. The printer with the
shortest waiting time is recommended and its header
row turns Green. The other printers’ header rows turn
yellow. If two or more printer meet all the noted crite-
ria, multiple header rows will be green.
8b User-Defined Processing Order
(user-selected option) If a printer or Cluster supports all the criteria noted in
1-7 above, the header row turns green, indicating a
perfect match. Printers only NOT Clusters: If you have
specified a Printer Priority, the jobs will process ac-
cording to this parameter. If Printer Priority settings
are equal, the printer with the
shortest Time Remaining value will be selected. For
details about this setting, please see “Printer Priority”
on page 5-80.