Konica Minolta Printgroove - Manual (Page 182)

Using Printgroove POD Queue 6
Printgroove POD Queue 6-16
6.2.5 Move Print Job Out of Printer’s Queue
Certain situations may occur that make it necessary for you to remove one
or more jobs from a printer’s queue. For instance, a customer may cancel an
order, a printer may be down for servicing or a printer may receive a fatal er-
ror while processing jobs. To move jobs out of a printer queue, follow this
procedure:
1
Click on a job to select it.
2
Right-click to open the drop-down menu. There are two options that
move the selected job(s) out of the printer’s queue:
– Move: moves the job to the specified printer (For instructions for
completing this option, please see page 6-11.)
– Cancel: Use this option to move the job from the Printer jobs to
the Completed Jobs panel. The job status changes to
Cancel after the move. If Printgroove POD Queue is a
stand-alone application, the job may be later moved back
to the Inbox panel and printed. If Printgroove POD Guide
is active, the job is sent back to Printgroove POD Guide
and must be resubmitted for printing to occur.