Konica Minolta Printgroove - Manual (Page 174)

Using Printgroove POD Queue 6
Printgroove POD Queue 6-8
When Auto Mode is [On], Group, printer or cluster matches may not be found
for all jobs. These unmatched jobs are placed in the Inbox panel and must
be manually processed.
If Printgroove POD Queue is running and Auto Mode is changed from Off to
On, jobs that are in the Inbox prior to the change will not be automatically
matched against Enabled printers and Clusters. Only new jobs sent to Print-
groove POD Queue after the change was made will be automatically
matched.
When Auto Mode is [Off], all jobs are placed in the Inbox and must be man-
ually processed.
6.1.4 Locate a Print Job Destination
Once you have checked and resolved print jobs with special settings, once
all required jobs have been batched, jobs may then be sent to a printer for
processing. Printgroove POD Queue provides several tools that help you lo-
cate the best matched printer for each job.
2
Note
Print jobs may also be sent to Clusters or Virtual Queues. Please see
“Cluster Jobs” on page 6-22 or “Virtual Queue Jobs” on page 6-28 for
discussions about these processing options.
Destination Panel
The Destination panel, the Information panel and the Printer Monitor are
three easy-to-access tools that provide quick information about individual
printers.
The Destination panel provides an iconographic image of each discovered
printer. Roll the mouse over a printer icon and an information screen opens.
This provides the printer’s IP Address, Model, Status and color Type infor-
mation. The icons for Enabled printers are in color. Any Disabled printers are
gray. You cannot use Disabled printers.
Information Panel
If the Destination panel does not provide enough information to make a se-
lection, click on a printer’s icon. Additional information about the printer ap-
pears in the Information panel.
The Information panel has two tabs. By default, the [Device View] tab is se-
lected. A fully configured bitmap image of the printer appears in the panel.
Click the [Quick View] tab and a Quick View summary of important printer
data appears in the panel.