Konica Minolta Printgroove - Manual (Page 150)

Printgroove POD Queue Tools 5
Printgroove POD Queue 5-79
Settings
There are six types of Printer Settings: Registration and Customization, Print-
er Priority and Device Queue Name, Special Feature: Booklet Shrink to Fit
and Installed Feature: High Chroma Printing.
Registration
Some printers support the Password Enable feature. If a printer used by
Printgroove POD Queue is configured with this setting to On, the User ID and
Printer Password must be registered with Printgroove POD Queue before
Printgroove POD Queue can Enable the printer. This is a one-time setting
and does not require modification unless the User ID or Printer Password are
changed at the printer.
NOTE: If a Konica Minolta printer has the Password Enabled Feature set to
On, the User ID and Printer Password values are limited on a per-device ba-
sis. This is a printer- specific limitation and can be located in the Printer’s Us-
er’s Guide.
When you Enable a printer, a pop-up screen will open and notify you if this
setting is required. You must enter this information before the printer can be
Enabled.
Use the following procedure to enter the printer settings.
1
Double-click on a printer icon in the Destination panel to open the
Printer Monitor.
2
Click the [Settings] Setting Option to open the screen.