Konica Minolta Printgroove - Manual (Page 90)

Printgroove POD Queue Tools 5
Printgroove POD Queue 5-19
Save in User Box Use this option to save a print job to the printer’s hard disc drive.
Once saved, the job appears as a Box-type job in the Printer Jobs
panel. The job may be printed at any time from this panel.
However, no banner page is output.
If this option is selected, three fields are active:
• User Box Number:
Enter a value in this field and note it. This value may only include
numbers and cannot exceed nine characters.
• Document Name:
The PDF file attached to the print job is noted in this field.
It cannot be modified.
Note:
• In the case of the Fiery controller, print jobs are transmitted to
the Hold queue.
• When a Box Job is printed, the job remains in the Printer Jobs
Panel. To complete the job, right-click on the job and select
[Complete Box Job] from the drop-down menu.
Save in User Box and Print This is an alternative version of [Save in User Box], the only differ-
ence being that a single run of the job is completed before the print
job is stored. Set up as noted above.
Note:
In the case of a controller manufactured by a third party, [Save in
User Box and Print] is not supported.
Wait When this option is selected, the printer waits before printing the
job. This option helps avoid misprints when a large job is sent to a
printer. When selected, the banner page of the job prints then the
job is paused. You must release the print job at the operation panel
of the printer. Once manually released, the print job processes.
Proof and Print Proof & Print is useful if you want to print a copy of a job and review
it before releasing the job to print a larger run. When you drag a
Proof & Print job from the Inbox to a Printer, a copy of the job ticket
will appear in the Printer Jobs panel. The job ticket number will
have ProofPrint added to the beginning of the number to indicate
that this is a Proof copy. The original job ticket remains in the Inbox
and can be printed as many times and on as many printers as is
required. When you are ready to print the full job, you must manu-
ally change the Output Method to Print. You may then process the
job normally.