Konica Minolta Printgroove User Manual
Page 154
Printgroove POD Queue Tools
5
Printgroove POD Queue
5-83
6
Click [Save]. The Printer Monitor closes and the recognition is activat-
ed.
If the C65hc is added to POD Queue Manually . . .
1
Complete the procedure as described in “Add a Single Printer Manual-
ly” on page 3-12.
2
Locate the C65hc’s icon in the Destination panel.
3
Enable the printer (see “Enabling a Printer” on page 3-28).
4
Right-click on the printer’s icon and select [Edit] from the drop-down
menu or double-click the printer’s icon to open the Printer Monitor.
5
Select the [Settings] option to open the Settings screen.
6
The [Installed Feature: High Chroma Printing] check box is at the bot-
tom of the screen. When manually adding a printer, this check box is
selected for you. Verify that it is selected. If it is selected, recognition is
active. Click [Close].
7
If it is not selected, select the check box then click [Save]. The Printer
Monitor closes and the recognition is activated.