Konica Minolta Printgroove - Manual (Page 179)

Using Printgroove POD Queue 6
Printgroove POD Queue 6-13
3
Select [Printers] from the [Category] drop-down menu.
4
Select the printer to which the job(s) should be sent from the [Available]
drop-down menu.
5
Click the [OK] button. The pop-up closes.
6
Printgroove POD Queue processes your request. First, POD Queue
checks to see if the job has any Non-Supported Settings. If settings are
detected, a popup opens and informs you of the issues (see “Resolving
Non-Supported Settings” on page 5-29 for details). After resolving
these (or if none are detected), POD Queue next performs a constraint
check. A pop-up informs you if any constraints are detected. If you re-
ceive a Mandatory constraint, the job will not print unless the Job Tick-
et is modified. Click the Cancel button to close the pop-up and then
correct the constraint. If you’d like a record of the constraint, click the
Export button on the pop-up. Navigate to the correct location and save
a file that contains the constraint information. If the constraints are Op-
tional, you may continue processing the job by clicking the Print button
on the pop-up screen. Once the job finishes printing, a Banner page
prints that notes Job Ticket settings and any Optional constraints you
may have received. You may then choose to complete these processes
off-line. Additionally, the Constraints column in the Completed Jobs
panel will show a value of [Yes]. This indicates that not all specified set-
tings were completed in-line.
If you continue or if no constraints are detected, the job(s) appear in the
Printer Jobs panel, in the folder for the selected printer.
Custom Paper Sizes and Types
If you drag a job that has a Custom Paper Size, Printgroove POD Queue will
look at the numeric value of the Custom size and see if the selected printer
can support the value. If the printer cannot support the Custom size, a Man-
datory constraint message will not this information. Conversely, if the select-
ed printer supports Paper Sizes outside the acceptable range of Printgroove
POD Queue’s Custom Paper Settings, you may need to use a printer-specif-
ic, job monitoring application to modify and process the job. If this is re-
quired, save the job as a Box job (see “Save in User Box, Wait or Print &
Proof” on page 6-11). This saves the job directly to the selected printer. You
may then access the job from the printer’s monitoring application and proc-
ess it using the correct paper size.
This also applies for Paper Types not supported by Printgroove POD Queue
(values that do not appear in the Paper Type drop-down menu).