Konica Minolta Printgroove - Manual (Page 35)

Configuring Printgroove POD Queue 3
Printgroove POD Queue 3-14
3.6 Operation Setup
After the SNMP settings have been specified, user accounts must be created
before users can access Printgroove POD Queue. Auto Mode, Banner Page,
Completed Jobs Options, Overage Settings and Printer Processing Order
options may then be set.
3.6.1 Managing Users
On initial launch, the Administrator must create the user accounts. Any per-
son assigned a user-level of Manager may subsequently modify user ac-
counts.
User accounts may be created for an unlimited number of users. However,
only five users may concurrently use Printgroove POD Queue.
To create and manage accounts, follow this procedure:
1
From the menu select [Configuration] --> [Operation Setup] --> [Man-
age Users]. The Manage Users screen opens.
2
All Current Users are listed in the main right panel. The following statis-
tics are also provided:
– Logged In: If the value is “Yes,” this indicates that the user
is currently logged in. If the value is “No,” this
means the user did not properly log out when
they ended their session.
– User Name: Assigned name of user.
– User Role: Administrator, Manager, Operator or Guest.
– Log In Time: The time the user’s session began.
From this screen you may Add, Edit, Delete or Log Out a user.