Konica Minolta Printgroove - Manual (Page 62)

Overview: Printgroove POD Queue 4
Printgroove POD Queue 4-7
1. Print
This is the default type for jobs that enter Printgroove POD Queue.
2. Proof
This is a user-defined setting. This setting allows you to print a single preview
copy of the job. (Please see “6. Output Method” on page 5-18 for details
about this setting).
3. Box
This is a user-defined setting. This type of job is stored directly to the printer
engine’s hard drive using Printgroove POD Queue. These jobs may be re-
printed at any time. (Please see “6. Output Method” on page 5-18 for details
about this setting).
4. Copy
A job ticket may be created in Printgroove POD Queue that does not contain
a print document. The actual document may be printed from a hard copy or
off a disc. And also, for a job ticket attached with two or more data, the job
type is displayed as “Copy”. On occasions like that, open the job ticket to
specify the print data. You may use Printgroove POD Queue to track this type
of job, then issue a command to manually Complete the job once it has print-
ed. (Please see “Manual Completion” on page 6-11 for complete instruc-
tions.)
5. Non-Queue
Printers may receive print jobs from sources other than Printgroove POD
Queue.
POD Queue accounts for these jobs in the following ways:
-
Non-Queue jobs appear as incomplete entries in the Printer Jobs panel,
in the folder of the printer to which they are assigned. The Job Ticket
Name field will contain the value Non-Queue job.
- You cannot modify these job from within Printgroove POD Queue. They
may be modified via the LCD panel of the printer to which they are as-
signed or via the printer’s driver.
4.4.2 Groups
A Group is a holding location for jobs that can be batched and processed at
one time.
Groups are optional. If you do not create a Group, none appear in Print-
groove POD Queue. If you do create a Group, a single row in the Inbox panel
identifies the name of the Group.