Konica Minolta Printgroove - Manual (Page 17)

Introduction 1
Printgroove POD Queue 1-12
1.9 Where to Go from Here
To help you quickly locate the information you require, an overview of each
chapter follows:
Chapter Two: Installing Printgroove POD Queue
Complete procedures for Installing the Printgroove Client are provided in this
chapter.
Chapter Three: Configuring Printgroove POD Queue
Configuration procedures are explained in this chapter. The System Admin-
istrator must set up many of these before Printgroove POD Queue can be
used. Once these are set, there are other configuration options that may be
modified on-the-fly.
Chapter Four: Printgroove POD Queue Overview
The main graphical user interface (GUI) is discussed in this chapter. All
screen features and their functionality are explained. A useful chapter for fa-
miliarizing yourself with the application.
Chapter Five: Printgroove POD Queue Tools
Printgroove POD Queue has several tools that allow you to modify job tick-
ets, create Clusters and Virtual Queues, monitor printers, create Groups and
conduct searches. Understanding these tools is integral to maximizing Print-
groove POD Queue’s printer monitor capabilities. This is a very important
chapter that facilitates your understanding of Chapter Six.
Chapter Six: Using Printgroove POD Queue
Once you understand the GUI and the Tools, you are ready to process print
jobs. Chapter Six walks you through Printgroove POD Queue’s workflow.
Tasks specific to each phase of the workflow are explained as are the pro-
cedures for dealing with those different situations.