Konica Minolta Printgroove - Manual (Page 46)

Configuring Printgroove POD Queue 3
Printgroove POD Queue 3-25
3.7.1 Manually Adding a Printer
1
From the menu select [File] --> [New] --> [Printer]. The Add Printer
screen opens.
2
From the drop-down menu, select a Printer Model. By default, the first
Printer Model in the list is selected.
– Note: Only models that appear in this list may be manually added.
3
Specify an IP Address. This field is mandatory.
4
If required, specify the Printer Name, Location and Contact Person and
Printer Priority.
These values will display in the Details panel and the Printer Monitor.
The Printer Name will also display under the printer’s icon in the Desti-
nation panel. Any value entered here will overwrite values sent via the
printer’s Host Utility. These new values, however, will only appear in
Printgroove POD Queue. The first three values are optional; the fourth
defaults to Normal.
5
Some third party printers require you to create and name a Device
Queue through which data is conveyed between the printer and Print-
groove POD Queue. Once created, the Device Queue must be regis-
tered with Printgroove POD Queue. If this field appears on the Add
Printer screen, the value is mandatory. See your System Administrator
if you have questions.
6
The remaining fields on the screen will vary based on the printer model.
Any remaining fields may be left blank.
7
Click the [Save] button. The new printer’s icon is added to the Destina-
tion panel. If the printer’s IP Address is not included in any SNMP Dis-
covery Range you have created, a value for this printer will be added to
the SNMP Discovery Range table (please see “Add a Single Printer
Manually” on page 3-12 for details).
2
Note
Some printers do not provide Status information that Printgroove POD
Queue can access. In these cases, the printer icon will not reflect the ac-