Konica Minolta Printgroove - Manual (Page 23)

Configuring Printgroove POD Queue 3
Printgroove POD Queue 3-2
3.2 Logging In
1
Enter the IP Address of the Printgroove POD Server.
2
Enter the Port Number used by the Printgroove POD Server. The de-
fault value is 8180.
– Note: You enter the fields noted in Steps 1 and 2 the first time you
log in to Printgroove POD Queue. These fields are automatically
populated for subsequent log ins and only need to be modified if
the Printgroove POD Server information changes.
3
Enter the User Name. The default value is qadmin.
4
Enter the Password. The default value is password.
– Note: If LDAP is used for authentication, these default values do not
work unless they are also entered in the LDAP database.
5
Click the [OK] button.
Printgroove POD Queue performs two tasks: authentication and serv-
er/client compatibility verification.
3.2.1 Authentication
Be default, Printgroove POD Queue authenticates based upon the User
Name and Password values entered and stored in Printgroove POD Queue.
If you prefer, LDAP authentication may be used. If an LDAP method is used,
user accounts must exist in both the LDAP database and either the Print-
groove POD Queue or Printgroove POD Guide user accounts data base. If
this is not the case, the user cannot log in. Please see the ::Admin for Print-
groove User’s Guide for more information about LDAP options.
1
If log in is unsuccessful due to errors with the User Name or Password,
a failure screen opens to notify you of the situation. If this occurs, verify
your [User Name] and [Password] with your System Administrator. Log
In will not be allowed until this situation is resolved.