JLG G6-42P Service Manual - Manual (Page 70)

Section 5 - Attachments
5-8 31200148
3. Engage Quick Switch™.
4. Shut off engine. Exit cab and remove retainer pin
and slide lock pin in fully. Secure lock pin in locked
position using retainer pin.
5. If equipped, swing attachment saddles down and
pin in place.
6. If equipped, connect auxiliary hydraulic hoses.
7. If equipped, connect auxiliary electric harness.
WARNING
CRUSH HAZARD. Always be certain that carriage or attachment is properly
positioned on boom and is secured by lock pin and retainer pin. Failure to ensure
proper installation could permit carriage/attachment/load to disengage.
OX0470
OX0470
OX0480