11 telescope cylinder, Removal, Telescope cylinder -12 – JLG 24RS Service Manual User Manual
Page 112: Removal -12, Boom proximity sensor -12, 11 telescope cylinder removal
Advertising
SECTION 4 - BOOM & PLATFORM
4-12
– JLG Lift –
3121287
4.11 TELESCOPE CYLINDER
Removal
1.
Remove the bolt and keeper pin that secure the upper
master cylinder pivot pin (barrel end) to the main boom.
2.
Drive the pivot pin out. It may be necessary to toggle
the basket level switch to get the pin loose.
Figure 4-6. Boom Proximity Sensor
Advertising