JLG 24RS Service Manual - Manual (Page 14)

SECTION 1 - SPECIFICATIONS
1-2 – JLG Lift – 3121287
Tires
Engine Data
Hydraulic Oil
NOTE: Hydraulic oils require anti-wear qualities at least API Ser-
vice Classification GL-3, and sufficient chemical stability
for mobile hydraulic system service.
NOTE: Machines may be equipped with Mobil EAL biodegrad-
able and non-toxic hydraulic oil. This is a fully synthetic
hydraulic oil that possesses the same anti-wear and rust
protection characteristics as mineral oils, but will not
adversely affect the ground water or the environment
when spilled or leaked in small amounts.
NOTE: Aside from JLG recommendations, it is not advisable to
mix oils of different brands or types, as they may not con-
tain the same required additives or be of comparable vis-
cosities. If use of hydraulic oil other than Mobil 424 is
desired, contact JLG Industries for proper recommenda-
tions.
Table 1-4. Tires
Size 39 x 15-22.5
Maximum Tire Load 13,100 lbs. (5942 kg)
Type Foam Filled
Table 1-5. Deutz D2011
Type Liquid Cooled
Number of Cylinders 4
Bore 3.7in. (94 mm)
Stroke 4.4 in. (112 mm)
Total Displacement 189.6 cu. in. (3.1 L)
Compression Ratio 19.0:1
Firing Order 1-3-4-2
Output 36.4 hp (48.8 kW)
Low Idle RPM 1200 ± 50
High Idle RPM 2500 ± 50
Table 1-6. Hydraulic Oil
Hydraulic System
Operating
Temperature Range
S.A.E. Viscosity
Grade
+0° to + 180° F
(-18° to +83° C)
10W
+0° to + 210° F
(-18° to +99° C)
10W-20, 10W30
+50° to + 210° F
(+10° to +99° C
20W-20