JLG 24RS Service Manual - Manual (Page 20)

SECTION 1 - SPECIFICATIONS
1-8 – JLG Lift – 3121287
4. Hydraulic Tank Return Filter and Breather
Interval - Change after first 50 hrs. and every 6 months
or 300 hrs. thereafter.
Comments - For breather element, remove wing nut and
cover to replace. Under certain conditions, it may be
necessary to replace both elements on a more fre-
quent basis.
5. King Pins
Lube Point(s) - 2 Grease Fittings
Capacity - As Required
Lube - MPG
Interval - Every 3 months or 150 hrs of operation
6. Wheel Drive Hub
Lube Point(s) - Level/Fill Plug
Capacity - 20.5 oz. (0.6 L)
Lube - Mineral Oil ISO VG150
Interval - Check level every 3 months or 150 hrs of oper-
ation; change every 2 years or 1200 hours of operation
7. Oil Change with Filter
Lube Point(s) - Fill Cap/Spin-on Element
Total Capacity (Engine & Oil Cooler)- 15 Quarts (14.2 L)
w/Filter
Lube - EO
Interval - Check level daily; change every 600 hours or
six months, whichever comes first. Adjust final oil
level by mark on dipstick.
FILL PORT
15°
OIL SHOULD BE
TO THIS HEIGHT