JLG 24RS Service Manual - Manual (Page 135)

SECTION 5 - HYDRAULICS
3121287 – JLG Lift – 5-11
Telescope Cylinder
DISASSEMBLY
1. Remove the valve assembly.
2. Unscrew the 1st rod cover and pull the 1st and 2nd rod
assembly from the cylinder barrel.
3. Unscrew the 2nd rod cover and pull the 2nd rod assem-
bly from the 1st rod assembly.
4. Unscrew the setscrew and piston from the rod assembly.
5. Pull the rod cover from the rod assembly.
6. Remove the seals from the pistons.
7. Remove the seals from the rod cover.
ASSEMBLY
1. Install seals on the components.
2. Install the head, stop collar, and piston on the rod.
3. Screw the hex nut on the rod, put the steel ball in the
thread hole, and screw in the setscrew.
4. Install the rod to the barrel.
5. Torque the head.