JLG 24RS Service Manual - Manual (Page 15)

SECTION 1 - SPECIFICATIONS
3121287 – JLG Lift – 1-3
Major Component Weights
DO NOT REPLACE ITEMS CRITICAL TO STABILITY WITH ITEMS OF DIFFERENT
WEIGHT OR SPECIFICATION (FOR EXAMPLE: BATTERIES, FILLED TIRES, PLAT-
FORM) DO NOT MODIFY UNIT IN ANY WAY TO AFFECT STABILITY.
1.2 FUNCTION SPEEDS
Notes:
1. Personality settings can be adjusted anywhere within
the adjustment range in order to achieve optimum
machine performance.
2. Stop watch should be started with the function move-
ment, not with actuation of the joystick or switch.
3. All speed tests are run from the platform, except those
specifically designated to be run in Ground Mode.
4. The platform speed control knob must be at full speed
(turned clockwise completely) unless noted.
5. Functional speeds may vary due to cold thick hydraulic
oil. Test should be run with the oil temperature above
38° C (100° F)
6. Drive test results reflect 39 x 15 - 22.5 Foam Filled Tires.
Table 1-7. Critical Stability Weights
Components LBS. KG.
Tire & Wheel (Foam-Filled) 513 233
Engine Assembly (w/tray) 1125 510
Battery 41 18.5
Chassis complete (w/swing bearing) 4950 2245
Chassis & Turntable (w/o booms) 11735 5323
Left Counterweights 907 411.5
Right Counterweights 907 411.5
Tower Boom 2013 913
Tower Link 893 405
Upright 1715 778
Main Boom Assembly 3475 1576
Platform 224 102
Platform Support 68 31
Platform Rotator 55 25