JLG 24RS Service Manual - Manual (Page 87)

SECTION 3 - CHASSIS & TURNTABLE
3121287 – JLG Lift – 3-49
10. Connect the hoses to the drive pump as tagged during
removal.
11. Install the swing drive and adjust the backlash. Refer to
Section 3.8 - Procedure for Setting Swing Gear backlash.
Connect the hydraulic lines to the swing drive as tagged
during removal.
12. Install the hoods on the machine.
Swing Bearing Torque Values
1. Outer Race - 280 Nm (206.5 ft.lbs.) w/JLG Threadlocker
P/N 0100019.
2. Inner Race - 280 Nm (206.5 ft.lbs.) w/JLG Threadlocker P/
N 0100019.
3. See Swing Bearing Torquing Sequence.
CHECK THE INNER AND OUTER SWING BEARING BOLTS FOR MISSING OR
LOOSENESS AFTER FIRST 50 HOURS OF OPERATION, AND EVERY 600 HOURS
THEREAFTER.