JLG 24RS Service Manual - Manual (Page 118)

SECTION 4 - BOOM & PLATFORM
4-18 – JLG Lift – 3121287
Figure 4-8., Hose Adjustment - Figure 1 below).
3. Pull the hoses and cables through the push tube in the
same order as the carrier tube and power track.
4. Adjust the pull lengths at position “A” (See Figure 4-9.,
Hose Adjustment - Figure 2). With the pull lengths set,
tighten the hose clamp at position “A” until hoses are
tight and unable to be moved.
5. Adjust the pull lengths at position “B” (See Figure 4-10.,
Hose Adjustment - Figure 3). With the pull lengths set,
Figure 4-8. Hose Adjustment - Figure 1
Figure 4-9. Hose Adjustment - Figure 2